Gaming Guide

GTA 6 Sea Plane Controls: How to Take Off, Steer and Land (Gone Fishing)

The PS5 buttons for Brian's float plane in the Chapter 1 mission, plus what to do if the plane gets destroyed.

The PS5 buttons for Brian’s float plane in the Chapter 1 mission, plus what to do if the plane gets destroyed.

You first fly the sea plane in GTA 6 during “Gone Fishing”, a Chapter 1 mission where you play as Jason. It’s a white and blue float plane with “Brian’s” painted on the side, and you climb into it when the objective reads “Escape the camp”. The controls below are the PS5 default layout.

Quick answer: On PS5, hold R2 to accelerate and use the left stick to take off and turn, and hold Square or Circle for the rudder. To land, drop low over open water and let go of R2.


GTA 6 sea plane controls on PS5

Once you’re seated, check the screen’s top-left corner for the first control prompt: “R2 Accelerate” appears with a left-stick icon and “Take Off” beneath it. The next tip pops up right afterward and explains the rudder.

GTA 6 sea plane on the water with the prompt R2 Accelerate and Take Off
The first prompt: R2 Accelerate, left stick Take Off.
ButtonWhat it does
R2Accelerate
Left stickTake off; turns the plane on the water
Hold Square or CircleRudder, in the air or on the water

The rudder tip reads “Hold Square or Circle to use the plane rudder while flying or on the water.” That means the same two buttons work whether you’re taxiing across the water or already up in the air.

GTA 6 tip Hold Square or Circle to use the plane rudder while flying or on the water
The rudder works in the air and on the water.

Taking off from the water

With R2 held, the plane rolls over the water and builds speed gradually. Leave yourself a long, clear stretch of water before using the left stick to take off. If you need to line up first, keep R2 down and push the left stick to either side to turn the plane on the water.

While you’re in the plane, the minimap changes too. An altitude ladder sits on top of it, and your height in feet shows in its bottom-left corner. It reads about 5 ft while you’re sitting on the water and climbs once you’re airborne, up to figures like 582 ft in flight, so it’s an easy way to check whether you’ve actually left the surface.

Hitting land or trees can destroy the plane and fail the mission with “THE PLANE WAS DESTROYED.” The mangroves around the camp are easy to clip; we lost the plane after running into them.

GTA 6 mission failed screen THE PLANE WAS DESTROYED
Crash into land and the mission fails.

The fail screen gives you three choices. Retry Checkpoint (Cross) puts you back to try again, Restart Mission (Triangle) starts “Gone Fishing” over, and Skip Checkpoint (Square) drops you straight into the air with the plane already flying and the objective changed to “Land near the docks”. If the take-off keeps going wrong, Skip Checkpoint gets you past it.

GTA 6 sea plane flying at 582 ft with the objective Land near the docks
In the air at 582 ft with "Land near the docks".

How to land the sea plane near the docks

Bring the plane down low over open water, away from land and trees. Keep an eye on the height readout on the minimap as you come down.
Let go of R2. With no throttle the plane settles onto the water on its own and keeps gliding forward. You’ll know you’re down when the height readout drops to about 6 ft.
GTA 6 sea plane landed on the water at 6 ft under a storm
Down on the water: the readout drops to about 6 ft.
Check the objective. Once you’re on the water, it changes from “Land near the docks” to “Take the plane to Brian’s marina”.
Taxi to the marina by holding R2 gently and steering with the left stick. Going easy on the throttle keeps the plane slow enough to steer around the docks.