Shindo Life Commands: Every Chat Command and How to Use Them

Shindo Life runs a large chunk of its social, cosmetic, and training features through text commands you type into the chat box. These are not cheats or exploits. They are built-in shortcuts that Rell Games layered on top of the Roblox chat, and most of them work in any standard server.

Quick answer: Open the chat, type a command starting with ! (for example !squad or !village haze), then press Enter to run it. Type !cmds in game to pull up the full command list, and !ccmds to close it.

How to run a command in Shindo Life

Open the chat window in your current server. Every command begins with an exclamation mark, so the game reads it as an instruction instead of a normal message.

Type the command exactly as written, including any player name or value it needs. For commands that target a player, replace the bracket placeholder with a username, such as !inv Bob.

Press Enter. A confirmation notification appears for most actions, such as Changed band symbol to Nimbus after a village swap, so you know it registered.

If nothing happens, the most common causes are a mistyped command, a target player who is not in the server, or a requirement you have not met yet. Several commands only work under specific conditions, which are listed in the tables below.

These handle grouping up with other players and starting fights. Duel commands only work when both players are standing on a duel pad.

Command	What it does
`!squad`	Creates a squad.
`!inv [player]`	Invites the named player to your squad.
`!acc [player]`	Accepts a squad invite sent to you.
`!duel [player]`	Duels the named player (both must be on a duel pad).
`!accd [player]`	Accepts a duel invitation.
`!kick [player]`	Kicks a player.
`!leave`	Leaves a squad, or deletes it if you are the creator.
`!1v1 [player] [player]`	Sets up a 1v1 training match.
`!cmds`	Shows the full command menu.
`!ccmds`	Closes the command menu.
`!name`	Changes your in-game roleplay name.

Tailed Spirit commands

The Tailed Spirit commands cover color customization, the berserk mini-game, and mode upgrades. A Tailed Spirit mode must be active before most of these will do anything.

Command	What it does and requirements
`!spirit`	Teleports you to the spirit realm to recolor your Tailed Spirit’s aura. Needs two spins to reroll the color. Does not work with Rab, Tyn, or Gen 1 spirits.
`!spirit off`	Exits the Tailed Spirit customization room.
`!beserk`	Auto-attacks and teleports to nearby targets with melee, Z, and Q abilities, and opens spirit questions worth roughly 10,000 exp per correct answer.
`!tentacion`	Activates Tentacion Mode for a Level 2000 Tailed Spirit. With a Gen 3 spirit equipped (Apol, Octopop, Korama), it teleports you to the Tentacion Boss Arena to unlock Stage 4. Does not apply to Gen 1 spirits.

Tip: When you enter the spirit realm with !spirit, an on-screen prompt reminds you to type !spirit off to leave. Use the randomize option to reroll the aura, then confirm the new color before exiting.

Cosmetic commands (dog, axe, and puppet)

A few commands change the look of companions and weapons. Some recolor options open a Roblox purchase prompt and cost Robux, so read the prompt before confirming.

Command	What it does
`!cdog`	Changes the color of Okami’s dog through a paid Robux prompt.
`!renaxe green/gold/ruby/random`	Recolors the Renshiki Axe. The green, gold, and ruby options are free; `random` opens a paid Robux prompt.
`!puppet`	Opens Puppet Art customization for the mask, head, cloak, and accessory.
`!revertface`	Removes your saved face ID.

The Renshiki Axe glows in whichever color you set last. Type !renaxe green at any time to return it to its default green glow at no cost.

Headband and village commands

Your headband symbol reflects a chosen village, and a slash mark marks you as a rogue. Two commands control both parts. Type !village followed by a village name to switch the symbol, and use !cross to toggle the rogue slash.

Command	What it does
`!village [name]`	Sets the headband symbol to a village such as Ember, Haze, Nimbus, Dunes, Obelisk, Tempest, Blaze, Tone, Vinland, or Jejunes.
`!cross on`	Adds the crossed-out slash to mark you as a rogue.
`!cross off`	Removes the slash and shows the clean village symbol.

Each change triggers a notification, for example Changed band symbol to Nimbus or Changed rogue band symbol to off. That confirmation is how you know the swap took effect.

Training commands

Training commands set up and manage practice sessions. Some of these are restricted and may not run for every player.

Command	What it does
`!cpads`	Creates a training.
`!begin`	Starts a training.
`!end`	Ends a training.
`!reward`	Claims a training reward.
`!bell`	Runs bell training.
`!tm`	Runs TDM training.
`!inf`	Shows training info.
`!pushup`	Exercise training.
`!treejump`	Exercise training.
`!ktrain [player]`	Kunai training with the named player.
`!ffon` / `!ffoff`	Turns friendly fire on or off.

War server and Kage commands

These only function inside war servers or for players holding the Kage role. They will not respond in a standard public server.

Command	What it does
`!spawn [mapname]`	Spawns a map (war server only).
`!despawn`	Removes the spawned map (war server only).
`!game tdm, elim`	Sets the game mode (war server only).
`!endgame`	Ends the current game (war server only).
`!team1` / `!team2`	Assigns teams (war server only).
`!spawn team`	Spawns a team (war server only).
`!rogue` / `!unrogue`	Kage-only rogue toggle.

Extra utility commands

Command	What it does
`!cancel`	Exits a mission.
`!topad`	Teleports you to the Cpad.
`!domain [player]`	Pulls a player into Forged-Rengoku’s dimension. Needs Forged-Rengoku or Forged Sengoku’s Z Mode and full health.
`!skip`	Skips to the last cutscene segment before an event boss fight, after your current segment finishes.
`!autoclick on/off`	Starts or stops autoclicking.

Why a command might not work

If a command does nothing, check these known conditions before assuming it is broken.

!duel and !accd need both players standing on a duel pad.
!spirit requires an active Tailed Spirit mode and does not work with Rab, Tyn, or Gen 1 spirits.
!tentacion needs a Level 2000 spirit and skips Gen 1 spirits entirely.
!domain fails if your health is not full or you lack the required Z Mode.
War server and Kage commands do nothing in standard public servers.
Training commands like !cpads can be role-restricted and may be unavailable to some players.

Keep the syntax exact and swap in real usernames where a command asks for a player. Once a command runs correctly, the game responds with a teleport, a menu, or an on-screen notification, so there is always a clear signal that it worked.