The 3D Printer in Probably Stolen: Cyberpunk Shopkeeper Sim uses a chip and its listed materials to print the chip’s outputs overnight.
Quick answer: There are 15 printer chips. Each one uses 3D Printing Filament, Scrap Metal, Electronic Parts (Common), or a mix, and prints pistols, gun mods, magazines or small water bottles overnight.
Every print needs the same three things in the machine: a power source, the chip, and the chip’s materials. The printer then runs on its own overnight. The table below lists every chip with its exact in-game name, the materials it consumes per print, what it outputs, and base values in credits.
| Chip | Materials | Output | Chip / output value |
|---|---|---|---|
 3D Printer Chip (x2 .22 Pistol) | 3 x 3D Printing Filament | Liberator 3D Printed Pistol x2 | 400 / 40 each |
 .22 Pistol 3D Printer Chip | 2 x 3D Printing Filament | Liberator 3D Printed Pistol x1 | 250 / 40 each |
 3D Printer Chip (x4 Improved Internal Springs) | 2 x Scrap Metal | Improved Internal Springs x4 | 150 / 20 each |
 3D Printer Chip (x4 Makeshift RDS) | 1 x 3D Printing Filament, 1 x Electronic Parts (Common) | Makeshift Red Dot Sight x4 | 200 / 25 each |
 3D Printer Chip (x4 Toy Laser Pointer) | 1 x 3D Printing Filament, 1 x Electronic Parts (Common) | Toy Laser Pointer x4 | 200 / 18 each |
 3D Printer Chip (x6 Small Plastic Bottle) | 1 x 3D Printing Filament | Bottle of Water (Small) x6 | 100 / 4 each |
 3D Printer Chip (x2 RDS) | 3 x Scrap Metal, 1 x Electronic Parts (Common) | Red Dot Sight x2 | 300 / 60 each |
 3D Printer Chip (x2 Laser Sight) | 2 x Scrap Metal, 1 x Electronic Parts (Common) | Laser Sight x2 | 300 / 50 each |
 3D Printer Chip (x2 Silencer) | 5 x Scrap Metal | Suppressor x2 | 300 / 55 each |
 3D Printer Chip (x2 .22 Magazine) | 1 x 3D Printing Filament | .22 Magazine x2 | 250 / 15 each |
 3D Printer Chip (x2 High Cap. .22 Mag.) | 2 x 3D Printing Filament | High Capacity .22 Magazine x2 | 300 / 25 each |
 3D Printer Chip (x2 Ext. .22 Mag.) | 3 x 3D Printing Filament | Extended .22 Magazine x2 | 350 / 35 each |
 3D Printer Chip (x2 10MM Magazine) | 3 x Scrap Metal | 10mm Magazine x2 | 300 / 30 each |
 3D Printer Chip (x1 High Cap. 10MM Mag.) | 2 x Scrap Metal | 1x High Capacity Magazine for 10mm | 350 / 40 each |
 3D Printer Chip (x1 Ext. 10MM Mag.) | 3 x Scrap Metal | Extended 10mm Magazine x1 | 400 / 50 each |
Two chips print the same Liberator 3D Printed Pistol. The .22 Pistol 3D Printer Chip makes one per night from two spools, while the 3D Printer Chip (x2 .22 Pistol) makes two from three spools and carries a higher chip value.
How to run a print on the 3D Printer
The machine’s own instruction sheet, the 3D Printer Instruction, sums up the whole process: “Insert power source, printer chip and materials. Printer will work automatically overnight if requirements are met.” The printer has a base value of 350 credits.
Installed modules change how the printer behaves, with each module stat tied to one printer function:
- Efficiency affects Power Consumption
- Performance affects Printer Speed Rate
- Quality affects Print Quality On Eligible Items
3D Printer chips sorted by the materials you have
Only three materials feed the printer. 3D Printing Filament has a base value of 12 credits, Scrap Metal 10, and Electronic Parts (Common) 33. Customers also buy these materials off the shelf: a Lower Level Repairman picked up Scrap Metal and Electronic Parts (Common) on Day 2. Grouping the chips by input shows what you can print with what’s already in stock.
Scrap Metal only
- 3D Printer Chip (x4 Improved Internal Springs): 2 Scrap Metal
- 3D Printer Chip (x2 Silencer): 5 Scrap Metal
- 3D Printer Chip (x2 10MM Magazine): 3 Scrap Metal
- 3D Printer Chip (x1 High Cap. 10MM Mag.): 2 Scrap Metal
- 3D Printer Chip (x1 Ext. 10MM Mag.): 3 Scrap Metal
3D Printing Filament only
- 3D Printer Chip (x2 .22 Pistol): 3 filament
- .22 Pistol 3D Printer Chip: 2 filament
- 3D Printer Chip (x6 Small Plastic Bottle): 1 filament
- 3D Printer Chip (x2 .22 Magazine): 1 filament
- 3D Printer Chip (x2 High Cap. .22 Mag.): 2 filament
- 3D Printer Chip (x2 Ext. .22 Mag.): 3 filament
Chips that need Electronic Parts (Common)
- 3D Printer Chip (x4 Makeshift RDS): 1 filament, 1 Electronic Parts (Common)
- 3D Printer Chip (x4 Toy Laser Pointer): 1 filament, 1 Electronic Parts (Common)
- 3D Printer Chip (x2 RDS): 3 Scrap Metal, 1 Electronic Parts (Common)
- 3D Printer Chip (x2 Laser Sight): 2 Scrap Metal, 1 Electronic Parts (Common)
The printer’s item description calls it a machine that prints using plastic, but five chips run entirely on Scrap Metal and need no filament at all.
What each 3D Printer output is
Almost everything the printer makes lands in the Gun Mods category. The Liberator 3D Printed Pistol is the one Firearms item, and Bottle of Water (Small) is the one Food and Drink item.
| Output | Category | Detail |
|---|---|---|
| Liberator 3D Printed Pistol | Firearms | Low-cost plastic pistol |
| .22 Magazine | Gun Mods | 12 rounds |
| High Capacity .22 Magazine | Gun Mods | 24 rounds |
| Extended .22 Magazine | Gun Mods | 48 rounds |
| 10mm Magazine | Gun Mods | 9 rounds |
| High Capacity 10mm Magazine | Gun Mods | 14 rounds |
| Extended 10mm Magazine | Gun Mods | 19 rounds |
| Improved Internal Springs | Gun Mods | Promotes dependable action cycling |
| Suppressor | Gun Mods | Multi-caliber, reduces gunfire noise |
| Red Dot Sight | Gun Mods | Legacy compact sight |
| Makeshift Red Dot Sight | Gun Mods | Printed, red LED and plastic lens |
| Laser Sight | Gun Mods | Sends a beam toward the target |
| Toy Laser Pointer | Gun Mods | Low-powered toy |
| Bottle of Water (Small) | Food and Drink | Small plastic bottle |
The Makeshift Red Dot Sight and Red Dot Sight are separate items from separate chips. The makeshift version is cheaper to print, while the full Red Dot Sight has the highest per-item base value of anything the printer makes, at 60 credits.
See every other machine’s recipes in the Probably Stolen crafting recipes list, check material values in the items list, or start from the complete Probably Stolen guide.
