The Shun Shun Rikka Trace collectibles in Lineage Piece are five hidden markers scattered across the Hueco Mundo region. Gathering all five is part of a dedicated questline, and each one uses the same Collect prompt when you get close enough to interact.
Quick answer: Talk to the Questline NPC first, then travel to Hueco Mundo and collect Trace 1 on the tall stone pillar, Trace 2 at the stone wall below it, Trace 3 on the high rocky ledge, Trace 4 by the white domed building, and Trace 5 at the base of the large pillar near that dome.
Talk to the Questline NPC before collecting
The traces will not register until you have interacted with the Questline NPC. If you head straight into Hueco Mundo and try to grab a trace, the game blocks it with the message, “You have to interact with the Questline NPC before.” Start the questline first, then begin the route.
All five markers are labeled in order on screen, from Shun Shun Rikka Trace 1 through Shun Shun Rikka Trace 5, so you can confirm which one you are picking up as you go.
All 5 Shun Shun Rikka Trace locations in Hueco Mundo
| Trace | Where to find it |
|---|---|
| Trace 1 | On top of the tall stone pillar near the starting area. |
| Trace 2 | At the base of the stone wall structure directly below the first pillar. |
| Trace 3 | On a high, flat rocky ledge overlooking the valley. |
| Trace 4 | Next to the wall of the white domed building, near its entrance. |
| Trace 5 | At the base of the large pillar structure close to the domed building. |
Fastest route to grab every trace
How to confirm you collected all five
Each trace shows a Collect prompt when you are in range, and pressing it removes that marker from the world. Once all five are gone, the questline objective updates to reflect the completed set, so watch the on-screen trace labels count off from 1 to 5 as you clear them.
If a trace refuses to collect, the most common reason is skipping the Questline NPC step, which keeps the interaction locked until you start the quest. Return to the NPC, begin the questline, and the traces will respond to the Collect prompt as expected.
